Accessories & Options

For successful implementation of the Pole Mounted Occupancy sensor, a minimum of one hand-held remote is required

Tamper Proof Kit for stainless steel latches; includes 4 tamper proof screws and bit

Tamper Proof Kit includes 4 tamper proof screws and bit

16 Wire Guard for Prismatic & Acrylic Reflectors

16 Wire Guard for Aluminum Reflector

For use with 1×2 light engines: 32L. Must order end caps separately. Not compatible with 347V adaptor kits or EJBCR-5PK.

For use with 1×4 light engines: 22L, 40L, 40LHE and 50L. Must order end caps separately. Not compatible with 347V adaptor kits or EJBCR-5PK.

Optional accessory for continuous row installations

Required for all SMK installations

The SMK-CR surface mount kit is designed to convert Cree CR Series troffers into surface mount or suspended luminaires. It features a powder-coated white finish to compliment a variety of interior designs.

The SC6-WM cylindrical wall mount housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in a variety of architectural applications.

The SC6-CM cylindrical cord mount housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in a variety of architectural applications. It supports a maximum suspension distance of 7 ft. to the top of the fixture and may be field modified for shorter distance.

The SC6 cylindrical surface mount housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in a variety of architectural applications. It is rated for use with luminaires that consume low energy optimizing energy density calculations for easier energy code compliance and LEED certification. The SC6 housing also features a subtle, unobtrusive design that integrates cleanly into the interior space.

5′ safety cable

10′ safety cable

The RR6 recessed housing is designed to accommodate all Cree 120V six-inch downlights in retrofit applications. It is rated for use with luminaires that consume low energy optimizing energy density calculations for easier energy code compliance and LEED certification. The RR6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant.

The RC6 recessed housing is designed to accommodate all Cree 120V six-inch downlights in new construction applications. It is rated for use with luminaires that consume low energy optimizing energy density calculations for easier energy code compliance and LEED certification. The RC6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant.

C-Channel Hanger Bars

T-Bar Clips compatible with the RBH24C-1 hanger bars

3) #12AWG 102 wires for Line (black), Neutral (white), Ground (green)

(2) #18AWG 54 wires for 0-10V dimming (purple, gray)

Sloped Ceiling Adapter

KR Series Trim Ring

The H6 recessed architectural housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in new construction applications. It is rated for use with luminaires that consume low energy optimizing energy density calculations for easier energy code compliance and LEED certification. The H6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant.

Expanded size junction box for through wiring. Not compatible with surface mount kits.

Emergency Backup – 1400 lumens

16 Clear Prismatic Drop Lens for Prismatic & Acrylic Reflectors

The DGA lay-in accessory enables Cree CR Series troffers to easily install into plaster and sheet rock ceilings. It may be installed into any hard ceiling to create a simple t-bar style opening.

Flat black diffuse finish reflector

Wheat diffuse finish reflector

Black diffuse finish reflector

Silver diffuse finish reflector

CT6 trim accessories are designed for easy snap-in attachment to CR6 downlights, providing a clean aperture appearance that decreases high angle brightness with minimal effect on lumen output. With a variety of colored finishes to choose from, the CT6 is a spec-grade solution that complements a variety of interior designs.

For use with S controls. Not compatible with surface mount kits.

For use with 10V controls. Not compatible with surface mount kits.

16 Clear Cone Bottom Lens for Prismatic & Acrylic Reflectors

Matching Cree face plate, 2-gang, white

Matching Cree face plate, 1-gang, white

The C6-LSA is a hard-wire conversion kit, designed to convert pan type recessed downlight housings, with 6-8 apertures. Rated for use with low-wattage luminaires, the C6-LSA can help to optimize energy density calculations, making energy code compliance and LEED certification easier

The C6 conversion kit provides a connector assembly and two-piece enclosure to convert pan type recessed downlight housings with 120V (E26) Edison base connectors to be converted for use with all Cree 120V six-inch downlights. It is rated for use with luminaires that consume low energy optimizing energy density calculations for easier energy code compliance and LEED certification.

Surface Mount

Metal Tong (pair)

Adjustable Cable Kit for CR Troffers, Non-Feed

Adjustable Cable Kit for CR Troffers, Power Feed

Adjustable Cable Kit for CR Troffers, Power Feed

6′ Flexible Power Supply Whip for CR Troffers

48 Cable Support for T-bar mount

48 Power Feed, #12/3 SJT Cord with Cable Support for J-Box

48 Cable Support for Initial cap mount

48 Power Feed, #18/5 SJT Cord with Cable Support for J-Box

48 Power Feed, #18/2 SJT Cord with Cable Support for J-Box

Wavy Inner Optic Diffuser

Wireless eight-button switch with 12V power supply

Wireless two-button switch with 12V power supply

A stand-alone sensor for outdoor or indoor applications that includes both motion and photocell capabilities for a group of luminaires in a zone.

Striped Inner Optic Diffuser

A wireless, on-site control solution for monitoring and controlling outdoor and indoor lights via a SNAP mesh network.

The SMK-ZR surface mount kit is designed to convert Cree ZR Series troffers into surface mount or suspended luminaires. It features a powder-coated white finish to complement a variety of interior designs.

The SMK-ZR surface mount kit is designed to convert Cree ZR Series troffers into surface mount or suspended luminaires. It features a powder-coated white finish to complement a variety of interior designs.

The SMK-FLX is a surface mount kit is designed to convert Cree FLEX Series troffers into surface mount luminaires.

The SMK-FLX is a surface mount kit is designed to convert Cree FLEX Series troffers into surface mount luminaires.

The SMK-FLX is a surface mount kit is designed to convert Cree FLEX Series troffers into surface mount luminaires.

5′ Stainless Steel Aircraft Cable, two required per luminaire

For use with 2-Circuit Track. White or Black

For use with 1-Circuit Track. White or Black

For use with 1-Circuit Track. White or Black

Fastens track to 9/16″ inverted tee with flush tiles. One required for each 2′ of track. 4 per package.

Fastens track to 9/16″ inverted tee with drop tiles. One required for each 2′ of track. 4 per package.

Fastens track to 1″ inverted tee with drop tiles. One required for each 2′ of track. 4 per package.

For use with the low profile track fixture when used with a PAR38 lamp. Designed to cover the entire lamp for a finished appearance. Secures to the lampholder with two internal screws, white finish

For use with the low profile track fixture when used with a PAR38 lamp. Designed to cover the entire lamp for a finished appearance. Secures to the lampholder with two internal screws, black finish

For use with the low profile track fixture when used with a PAR30 lamp. Designed to cover the entire lamp for a finished appearance. Secures to the lampholder with two internal screws, white finish

For use with the low profile track fixture when used with a PAR30 lamp. Designed to cover the entire lamp for a finished appearance. Secures to the lampholder with two internal screws, black finish

For use with the low profile track fixture when used with a PAR20 lamp. Designed to cover the entire lamp for a finished appearance. Secures to the lampholder with two internal screws, white finish

For use with the low profile track fixture when used with a PAR20 lamp. Designed to cover the entire lamp for a finished appearance. Secures to the lampholder with two internal screws, black finish

For use with either single- or two-circuit adjustable, “T” or “X” connectors when feeding at outlet box. White or Black

For use with either single- or two-circuit adjustable, “T” or “X” connectors when feeding at outlet box. White or Black

Mounts directly to any outlet box. Not for use with low voltage fixtures with external power supplies. Black or White finish

Mounts directly to any outlet box. Not for use with low voltage fixtures with external power supplies. Black or White finish

Clear Lens

For use with two-circuit T-Bar mounted track. Joins two track sections for either 90-degree angle or straight run. Three 1/2″ knockouts. White or Black

For use with two-circuit track. End feeds comes with outlet box cover and mounting strap. White or Black

For use with two-circuit track. End feeds comes with outlet box cover and mounting strap. White or Black

For use with one-circuit track. End feeds comes with outlet box cover and mounting strap. White or Black

For use with one-circuit track. End feeds comes with outlet box cover and mounting strap. White or Black

For use with two-circuit track. Allows feed from above with Romex, Greenfield or conduit. Use as end feed when track is suspended with pendants. White or Black

For use with two-circuit track. Allows feed from above with Romex, Greenfield or conduit. Use as end feed when track is suspended with pendants. White or Black

For use with one-circuit track. Allows feed from above with Romex, Greenfield or conduit. Use as end feed when track is suspended with pendants. White or Black

For use with one-circuit track. Allows feed from above with Romex, Greenfield or conduit. Use as end feed when track is suspended with pendants. White or Black

For use with two-circuit track. Accepts 1/2″ conduit (male threaded) fitter for surface wiring. White or Black

For use with one-circuit track. Accepts 1/2″ conduit (male threaded) fitter for surface wiring. White or Black

For use with one-circuit track. Accepts 1/2″ conduit (male threaded) fitter for surface wiring. White or Black

For use with two-circuit track. Adjusts to connect two track sections either at a 90-degree angle or a straight run. 1/2″ knockout provided for through ceiling conduit. White or Black NOTE: If fed from an outlet box, use the outlet box cover when using this connector as a feed.

For use with one-circuit track. Adjusts to connect two track sections either at a 90-degree angle or a straight run. 1/2″ knockout provided for through ceiling conduit. White or Black NOTE: If fed from an outlet box, use the outlet box cover when using this connector as a feed.

For use with one-circuit track. Adjusts to connect two track sections either at a 90-degree angle or a straight run. 1/2″ knockout provided for through ceiling conduit. White or Black NOTE: If fed from an outlet box, use the outlet box cover when using this connector as a feed.

For use with two-circuit T-Bar mounted track. Joins two track sections for either 90-degree angle or straight run. Three 1/2″ knockouts. White or Black

For use with two-circuit T-Bar mounted track. Joins two track sections for either 90-degree angle or straight run. Three 1/2″ knockouts. White or Black

For use with one-circuit T-Bar mounted track. Joins two track sections for either 90-degree angle or straight run. Three 1/2″ knockouts. White or Black

For use with one-circuit T-Bar mounted track. Joins two track sections for either 90-degree angle or straight run. Three 1/2″ knockouts. White or Black

For use with two-circuit track. Connects two track sections end-to-end. White or Black

For use with two-circuit track. Connects two track sections end-to-end. White or Black

For use with one-circuit track. Connects two track sections end-to-end. White or Black

For use with one-circuit track. Connects two track sections end-to-end. White or Black

Pair of 24″ (610mm) x 1-1/2″ (38mm) x 1/2″ (13mm) standard C-Channel bars

Perforated Inner Optic Diffuser

LSQ Square Series End Caps (20 pair)

LSQ Square Series End Caps (pair)

Helps ensure that the gateway signal is amplified and propagated to other devices – 8dB gain. Kit includes antenna, 50′ cable and bracket

Helps ensure that the gateway signal is amplified and propagated to other devices – 8dB gain. Kit includes antenna, 20′ cable and bracket

Helps ensure that the gateway signal is amplified and propagated to other devices – 8dB gain. Kit includes antenna, 30′ cable and bracket

Anti-spin accessory for hook and cord mounting configuration

Suspension Kit with canopy kit and cables.

Pendant 1-1/2″ NPSM Mount Kit

Pendant 1-1/4″ NPSM Mount Kit

Hook & Cord Mount Kit

5W battery back up

10W battery back up

16″ (406mm) Clear Prismatic Drop Acrylic Lenses for Aluminum Reflectors

DGA24-WHT (10-pack)
For use when mounting in drywall ceilings.

DGA24-WHT (single-pack)
For use when mounting in drywall ceilings.

(10-pack) For use when mounting in drywall ceilings.

(Single-pack) For use when mounting in drywall ceilings.

DGA14-WHT (10-pack)
For use when mounting in drywall ceilings.

(Single-pack) For use when mounting in drywall ceilings.

Standard Inner Optic Diffuser

SmartCast^® Zone Controller

SmartCast® Wall Plug Power Supply

SmartCast^® Touchscreen

SmartCast^® Wireless Gateway with Wi-Fi

SmartCast^® Technology Wireless Switch

SmartCast^® Technology Wireless Dimmer

Satin nickel finish reflector for 6” options
Compatible with CR-T Series

Bronze finish reflector for 6” options
Compatible with CR-T Series

Flat black diffuse finish reflector  for 6” options
Compatible with CR-T Series

Black finish reflector for 6” options
Compatible with CR-T Series

Satin nickel finish reflector for 4” options
Compatible with CR-T Series

Bronze finish reflector for 4” options
Compatible with CR-T Series

Flat black diffuse finish reflector for 4” options

Black finish reflector for 4” options
Compatible with CR-T Series

SmartCast^® Technology Wireless Plug Load Controller

16″ (406mm) Clear Prismatic Drop Acrylic Lenses for Aluminum Reflector

One required per project when CMA control is selected

SmartCast^® Adjustable CCT Dimmer

A SimplySNAP SS450 site controller installed in a NEMA® 4X enclosure with a secure, 2.4 GHz line-of-sight wireless mesh network to connect up to 1,000 fixtures up to a mile away and local programmable push buttons to manually activate up to 25 Scenes (5 per button) across specific Zones or over the entire indoor or outdoor lighting installation.

“Linear High Bay Wire Guard, Suits C-PHB Series
17-3/10″” x 23-4/5″” Fixtures”

High Bay PIR Sensor, Suits C-PHB Series

LED Round High Bay Wire Guard Accessory White

LED Round High Bay Pendant Mount Accessory White

LED Round High Bay Clear Prismatic Drop Lens

LED Round High Bay White Aluminum Reflector

Linear High Bay Frosted lens, Suits C-HB-L4F Series 12″ x 47-1/2″ Fixtures

For use when surface mount to ceilings.

For use when suspended mounting only – Set of 2; Nickel Plated Steel

For use when surface mounting only – White painted nickel painted steel

Hook & Cord, 6ft, 208-240V, Twist Lock Plug, Fits 208-240V High Bays / Low Bays

Hook & Cord, 6ft, 120V, Twist Lock Plug, Fits 120V High Bays / Low Bays

Hook & Cord, 6ft, 120V, Straight Blade Plug, Fits 120V High Bays / Low Bays

Hook & Cord, 6ft, 277V, Twist Lock Plug, Fits 277V High Bays / Low Bays

Hook, 1/2″, Fits High Bays / Low Bays

Cord w-Strain Relief, 6ft, 208-240V, Twist Lock Plug, Fits any 208-240V Fixture

Cord w-Strain Relief, 6ft, 120V, Twist Lock Plug, Fits any 120V Fixture

Cord w-Strain Relief, 6ft, 120V, Straight Blade Plug, Fits any 120V Fixture

Cord, 6ft, 208-240V, Twist Lock Plug, Fits any 208-240V Fixture

Serves as the bridge between the SimplySNAP Intelligent Lighting Solution and a Building Management Systems (BMS). This integration makes it simpler to manage and maintain all of your facility’s commercial or industrial automated applications through one system.

Brushed Metal Inner Optic Diffuser

20 amp 480V Twist Lock Plug

15 amp 277V Twist Lock Plug

15 amp 240V Twist Lock Plug

15 amp 120V Twist Lock Plug

20 amp 347V Twist Lock Plug

15 amp 120V Straight Blade Plug

48 Cable Support for Initial cap mount (pack of 50)

48 Cable Support for Initial cap mount – 2″ canopy (pack of 50)

48 Cable Support for Initial cap mount – 2″ canopy

Adjustable Loop Cable Kit for unfinished ceiling applications (pack of 50)

Adjustable Loop Cable Kit for unfinished ceiling applications