Accessories & Options

Includes large bracket for mounting to 2 (51mm) IP, 2.375 (60mm) O.D. tenon, small bracket for mounting to 1.25 (32mm) IP, 1.66 (42mm) O.D. tenon and mounting bolts. NOTE: Line art on CI379X15R1

For use with HC and PD mounts only. Designed to prevent birds from landing or setting up a nest on the luminaire.

Used for replacement of existing bollards with a bolt hole circle of 5.75″ (146mm), white finish

Used for replacement of existing bollards with a bolt hole circle of 5.75″ (146mm), silver finish

Used for replacement of existing bollards with a bolt hole circle of 5.75″ (146mm), bronze finish

Used for replacement of existing bollards with a bolt hole circle of 5.75″ (146mm), black finish

Direct Arm Pole Adaptor Bracket for use with Horizontal Tenon Mount

Designed to prevent birds from landing or setting up a nest on the luminaire.

Designed to control backlight – put the light where you want it and not where you don’t.

Designed to prevent birds from landing or setting up a nest on the luminaire.

Designed to control backlight – put the light where you want it and not where you don’t.

For successful implementation of the Pole Mounted Occupancy sensor, a minimum of one hand-held remote is required

Used when installing pendant mount luminaires

15″ (381mm); Pendant height. Includes two conduit fittings and 3/4-14 NPT pipe threaded on two ends. Height from ceiling surface to bottom of fixture depends on the product; additional accessories or surface boxes will add to overall height.

11″ (279mm); Pendant height. Includes two conduit fittings and 3/4-14 NPT pipe threaded on two ends. Height from ceiling surface to bottom of fixture depends on the product; additional accessories or surface boxes will add to overall height.

5″ (127mm); Pendant height. Includes two conduit fittings and 3/4-14 NPT pipe threaded on two ends. Height from ceiling surface to bottom of fixture depends on the product; additional accessories or surface boxes will add to overall height.

For 0-13 degree sloped ceilings. Used when mounting pendant mounted luminaires.

30″ (762mm) Long – Mounting bars used to help secure the luminaire to wood trusses

22″ (559mm) Long – Mounting bars used to help secure the luminaire to wood trusses

14″ (356mm) Long – Mounting bars used to help secure the luminaire to wood trusses

Kit Includes four brackets

Spans two 16 deck panels. Metal plate used when replacing surface mounted HID luminaires. Painted Colorfast DeltaGuard^® white. Must be field cut to match luminaire.

Spans two 12 deck panels. Metal plate used when replacing surface mounted HID luminaires. Painted Colorfast DeltaGuard^® white. Must be field cut to match luminaire.

For use with 90 LED count. For use with shallow canopies that are less than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 90 LED count. For use with canopies that are greater than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 90 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 16-inch deck.

For use with 90 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 12-inch deck.

For use with 90 LED count. Plastic Kit without backer plate used with canopies that have maximum of 7 diameter cut hole.

For use with 60 LED count. For use with shallow canopies that are less than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 60 LED count. For use with canopies that are greater than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 60 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 16-inch deck.

For use with 60 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 12-inch deck.

For use with 60 LED count. Plastic Kit without backer plate used with canopies that have maximum of 7 diameter cut hole.

For use with 30 LED count. For use with shallow canopies that are less than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 30 LED count. For use with canopies that are greater than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 30 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a maximum of 12 diameter or 12 x 12 cut hole; 16-inch deck.

For use with 30 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a maximum of 10 diameter or 10 x 10 cut hole; 12-inch deck.

For use with 30 LED count. Plastic Kit without backer plate used with canopies that have maximum of 7 diameter cut hole.

For use when direct mounting luminaires to solid surfaces.

22 (559mm); Pendant height from ceiling surface to bottom of fixture; additional accessories or surface boxes will add to overall height

18 (457mm); Pendant height from ceiling surface to bottom of fixture; additional accessories or surface boxes will add to overall height

12 (305mm); Pendant height from ceiling surface to bottom of fixture; additional accessories or surface boxes will add to overall height

for use with LSI Richmond or Whiteway Civic luminaires in existing recessed (rectangular) canopies. 23.00″ L x 13.00″ W, 18 ga. Steel

for use with Elsco Merrit luminaires in existing 2×2 box canopies. 18.06″ square, 18 ga. Steel

for use with Whiteway Riviera or Rig-A-Lite luminaires in existing 2×2 box canopies. 20.60″ square, 18 ga. Steel

for use with LSI Dakota or Masters luminaires in existing 2×2 box canopies. 22.50″ square, 18 ga. Steel

for use with Elsco Franciscan luminaires in existing 2×2 box canopies. 22.06″ square, 18 ga. steel

for use with Jet-Philips luminaires in existing 2×2 box canopies. 21.60″ square, 18 ga. steel

6.0″ (152mm) H x 3/4″ (19mm) NPT Stem. Watertight. Rated for feed through 8 (4 in, 4 out) #12 AWC conductors

Beauty Plate only (26-inch square). Used to enhance aesthetic appeal. 18 ga. Steel.

Beauty plate (18 ga. steel) w/16″ (406mm) Backer Plate (16 ga. steel). For use in canopies where deck opening is larger than what is required for mounting the CPY250 luminaire. Maximum deck opening 12″ x 15″ (305mm x 375mm).

Beauty plate (18 ga. steel) w/16″ (406mm) Backer Plate (16 ga. steel). For use in canopies where deck opening is larger than what is required for mounting the CPY250 luminaire. Maximum deck opening 10.75″ x 15″ (183mm x 375mm).

Designed to prevent birds from landing or setting up a nest on the luminaire.

Tamper Proof Kit for stainless steel latches; includes 4 tamper proof screws and bit

Tamper Proof Kit includes 4 tamper proof screws and bit

Extended L-Shaped Surface Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

L-Shaped Surface Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

Extended Horizontal Surface Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

Horizontal Surface Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

Designed to prevent birds from landing or setting up a nest on the luminaire.

Must specify finish color. Not available with JB mount.

Round Steel Poles

For use with Hook & Cord Mounts. Steady Lock for eyebolt.

Twin – Mid-Pole Mounting Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

Single – Mid-Pole Mounting Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Quad – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Triple – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the The Edge® High Output Area/Flood luminaires.

90-degree Triple – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

120-degree Triple – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Twin – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the The Edge® High Output Area/Flood luminaires.

180-degree Twin – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the The Edge® High Output Area/Flood luminaires.

90-degree Twin – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

180-degree Twin – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

Single – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the The Edge® High Output Area/Flood luminaires.

Single – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

Round Tapered Steel Poles

90-degree Quad – Square Internal Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Quad – Square Internal Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Triple – Square Internal Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Triple – Square Internal Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Twin – Square Internal Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

180-degree Twin – Square Internal Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Twin – Square Internal Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

180-degree Twin – Square Internal Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

Single – Square Internal Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

180-degree Quad – Round External Mount Vertical Tenons (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

90-degree Quad – Square Internal Mount Vertical Steel Tenons (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

180-degree Quad – Square Internal Mount Vertical Steel Tenons (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

180-degree Triple – Round External Mount Vertical Tenons (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

180-degree Triple – Square Internal Mount Vertical Steel Tenons (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

180-degree Twin – Round External Mount Vertical Tenons (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

180-degree Twin – Square Internal Mount Vertical Steel Tenons (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

Single – Square Internal Mount Vertical Steel Tenons (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

Designed to control backlight – put the light where you want it and not where you don’t.

Used with a NEMA^® receptacle to illuminate the luminaire when a photocontrol is not used.

9″ (229mm) Extension Arm. Spaces luminaire center 9″ (229mm) away from the mounting surface.

Silver, 9″ (229mm) Extension Arm. Spaces luminaire center 9″ (229mm) away from the mounting surface.

9″ (229mm) Extension Arm. Spaces luminaire center 9″ (229mm) away from the mounting surface.

9″ (229mm) Extension Arm. Spaces luminaire center 9″ (229mm) away from the mounting surface.

18″ (457mm) Extension Arm. Spaces luminaire center 18″ (457mm) away from the mounting surface.

18″ (457mm) Extension Arm. Spaces luminaire center 18″ (457mm) away from the mounting surface.

18″ (457mm) Extension Arm. Spaces luminaire center 18″ (457mm) away from the mounting surface.

18″ (457mm) Extension Arm. Spaces luminaire center 18″ (457mm) away from the mounting surface.

12″ (305mm) Extension Arm. Spaces luminaire center 12″ (305mm) away from the mounting surface.

12″ (305mm) Extension Arm. Spaces luminaire center 12″ (305mm) away from the mounting surface.

12″ (305mm) Extension Arm. Spaces luminaire center 12″ (305mm) away from the mounting surface.

12″ (305mm) Extension Arm. Spaces luminaire center 12″ (305mm) away from the mounting surface.

Designed to control backlight – put the light where you want it and not where you don’t.

3/4″ Hook Adapter

Designed to prevent birds from landing or setting up a nest on the luminaire. Use with XSP Small.

Designed to prevent birds from landing or setting up a nest on the luminaire. Use with XSP Medium.

Designed to prevent birds from landing or setting up a nest on the luminaire. Use with XSP Large.

Designed to control backlight – put the light where you want it and not where you don’t.

Wireless eight-button switch with 12V power supply

Wireless two-button switch with 12V power supply

A stand-alone sensor for outdoor or indoor applications that includes both motion and photocell capabilities for a group of luminaires in a zone.

14″ (356mm) Square – Covers holes left by incumbent wall packs. Must specify finish color

12″ (305mm) Square – Covers holes left by incumbent wall packs. Must specify finish color

Mounts to wall or roof – Plate for OSQ-HO-DA mount

Designed for applications that have light trespass requirements.

Designed to provide front light control . Compatible with Traveyo Extra Large only.

Designed to provide front light control . Compatible with Traveyo Small only.

Designed to provide front light control . Compatible with Traveyo Medium only.

Designed to provide front light control . Compatible with Traveyo Large only.

Designed to provide backlight and sidelight control. Compatible with Traveyo Extra Large only.

Designed to provide backlight and sidelight control. Compatible with Traveyo Small only.

Designed to provide backlight and sidelight control. Compatible with Traveyo Medium only.

Designed to provide backlight and sidelight control. Compatible with Traveyo Large only.

Designed to prevent birds from landing or setting up a nest on the luminaire. Compatible with Traveyo Extra Large only.

Designed to prevent birds from landing or setting up a nest on the luminaire. Compatible with Traveyo Small only.

Designed to prevent birds from landing or setting up a nest on the luminaire. Compatible with Traveyo Medium only.

Designed to prevent birds from landing or setting up a nest on the luminaire. Compatible with Traveyo Large only.

Designed to control backlight – put the light where you want it and not where you don’t. Provides 1 mounting height cutoff. Compatible with Traveyo Extra Large only.

Designed to control backlight – put the light where you want it and not where you don’t. Provides 1 mounting height cutoff. Compatible with Traveyo Small only.

Designed to control backlight – put the light where you want it and not where you don’t. Provides 1 mounting height cutoff. Compatible with Traveyo Medium only.

Designed to control backlight – put the light where you want it and not where you don’t. Provides 1 mounting height cutoff. Compatible with Traveyo Large only.

Crown-Weld® Square Straight Steel Poles

A wireless, on-site control solution for monitoring and controlling outdoor and indoor lights via a SNAP mesh network.

The 5200-UL electronic turn-lock photocell is designed to meet local utility standards for street and highway LED luminiaires. Instant response.

Designed to mount the RUL luminaire to a wood pole. 24-inch curved raw aluminum arm mount. Includes zinc-plated steel hardware. Weight: 1.82 lbs.

Designed to provide front light control . Compatible with RSW Small only.

Designed to provide front light control. Compatible with RSW Medium only.

Designed to provide backlight and sidelight control. Compatible with RSW Small only.

Designed to provide backlight and sidelight control. Compatible with RSW Medium only.

Designed to provide backlight and sidelight control. Compatible with RSW Large only.

Designed to prevent birds from landing or setting up a nest on the luminaire. Compatible with RSW Small only.

Designed to prevent birds from landing or setting up a nest on the luminaire. Compatible with RSW Medium only.

Designed to control backlight – put the light where you want it and not where you don’t. Provides 1 mounting height cutoff. Compatible with RSW Small only.

Designed to control backlight – put the light where you want it and not where you don’t. Provides 1 mounting height cutoff. Compatible with RSW Medium only.

Designed to control backlight – put the light where you want it and not where you don’t. Provides 1 mounting height cutoff. Compatible with RSW Large only.

90-degree Quad – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the The Edge® High Output Area/Flood luminaires.

120-degree Triple – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

Mounts to 2.375″ (60mm) O.D. round aluminum or steel poles or tenons – Quad

Mounts to 2.375″ (60mm) O.D. round aluminum or steel poles or tenons – Triple

Mounts to 2.375″ (60mm) O.D. round aluminum or steel poles or tenons – Twin

Left rotated optics

Rotated optics; Large

Used for mounting the Noctura Series housing; 120-480V. NOTE: Ordered separate from the luminaire

Used for mounting the Noctura Series housing; 120-480V. NOTE: Ordered separate from the luminaire

5′ (1.5m) cable replacement; 120-480 Volt

5′ (1.5m) cable replacement; 120-277 Volt

UL (120-277V) Voltage only; Requires XA-SENSREM

Used for mounting the Noctura Series housing; 120-480V. NOTE: Ordered separate from the luminaire

Used for mounting the Noctura Series housing; 120-480V. NOTE: Ordered separate from the luminaire

Extended Arm includes a NEMA® 7-Pin Photocell Receptacle and a knockout for an Occupancy Sensor. Must be used wiith either the Direct Arm, Adjustable Arm or Trunnion Mount; 120-480V.

Used for mounting the Noctura Series housing. NOTE: Ordered separate from the luminaireFor use with 6L only.

Used for mounting the Noctura Series housing. NOTE: Ordered separate from the luminaireFor use with 3L only.

Used for mounting the Noctura Series housing. NOTE: Ordered separate from the luminaireFor use with 1L only.

Used for mounting the Noctura Series housing. NOTE: Ordered separate from the luminaireFor use with 10L only.

Visor attaches to the flood housing to reduce glare and light spill. Must specify finish color. For use with 6L only.

Visor attaches to the flood housing to reduce glare and light spill. Must specify finish color. For use with 3L only.

Visor attaches to the flood housing to reduce glare and light spill. Must specify finish color. For use with 28L only.

Visor attaches to the flood housing to reduce glare and light spill. Must specify finish color. For use with 21L only.

Visor attaches to the flood housing to reduce glare and light spill. Must specify finish color. For use with 1L only.

Visor attaches to the flood housing to reduce glare and light spill. Must specify finish color. For use with 14L only.

Visor attaches to the flood housing to reduce glare and light spill. Must specify finish color. For use with 10L only.

Used for mounting the Noctura Series housing. NOTE: Ordered separate from the luminaireFor use with 1L, 3L, 6L, 10L only

Used for mounting the Noctura Series housing.
120-480V.
NOTE: Ordered separate from the luminaire

Designed to prevent birds from landing or setting up a nest on the luminaire. For use with 35L only.

Designed to prevent birds from landing or setting up a nest on the luminaire. For use with 19L only.

Designed to control backlight – put the light where you want it and not where you don’t. Compatible with 35L only.

Designed to control backlight – put the light where you want it and not where you don’t. Compatible with 19L only.

Designed to control backlight – put the light where you want it and not where you don’t. Compatible with 11L only.

Helps ensure that the gateway signal is amplified and propagated to other devices – 8dB gain. Kit includes antenna, 50′ cable and bracket

Helps ensure that the gateway signal is amplified and propagated to other devices – 8dB gain. Kit includes antenna, 20′ cable and bracket

Helps ensure that the gateway signal is amplified and propagated to other devices – 8dB gain. Kit includes antenna, 30′ cable and bracket

Field-Installed Accessory designed to automatically turn your lighting on at dusk and off at dawn, helping you to save energy and money, while adding safety and security at night.

Designed for applications that have light trespass requirements.

Designed to prevent birds from landing or setting up a nest on the luminaire. Compatible with pendant mount only.

A SimplySNAP SS450 site controller installed in a NEMA® 4X enclosure with a secure, 2.4 GHz line-of-sight wireless mesh network to connect up to 1,000 fixtures up to a mile away and local programmable push buttons to manually activate up to 25 Scenes (5 per button) across specific Zones or over the entire indoor or outdoor lighting installation.

Serves as the bridge between the SimplySNAP Intelligent Lighting Solution and a Building Management Systems (BMS). This integration makes it simpler to manage and maintain all of your facility’s commercial or industrial automated applications through one system.